User guide: all you need to know about chlorine tablets for above ground pool

chlorine tablets for above ground pool are a super easy way to keep the chlorine level up in your pool and one of the most popular methods for chlorinating pools. 
To create a product that aids in water sanitization, chlorine loss, and clarity the tablets are a combination of multiple chemicals such as calcium or cyanuric acid (CYA) and those can impact pool pH, alkalinity, and CYA levels. which means they dissolve slowly in water and provide long-lasting sanitation.
They appear very simple to use but there are a lot of things you should know about the use of them and of course some safety guidelines. 

Why Pools Need Chlorine

Have you ever noticed that if you forget to put chlorine tabs in the pool, it begins to turn hazy before it goes green? Without a constant supply of sanitizer, particulate matter accumulates and becomes visible, sometimes within hours!

Chlorine is the most effective agent in the battle against any pool water contaminants, like bacteria, animal droppings, cosmetics, and detergents. The powerful sanitizer effectively attaches to and neutralizes bacteria and contaminants before they can take root and disturb your pool water balance.

Chlorine also combines with other unnatural contaminants, such as nitrogen and ammonia, and transforms into “combined chlorine”. Combined chlorine, better known as “chloramines”, is responsible for the overwhelming chemical smell often found at public pools. While you may think this smell indicates clean and sanitized water, that couldn’t be further from the truth. Because chloramines develop when chlorine combines with ammonia — which drastically reduces chlorine’s effectiveness — they are indicative of poorly sanitized water.

Thankfully, chloramines are easy to diagnose and remove. Test your pool water frequently with a test kit or test strips, and shock your pool if chloramines are present.

Always keep your pool water chemical levels between the following ranges:
·pH: 7.4–7.6
·Total Alkalinity: 80–120 ppm
·Cyanuric Acid: 30–50 ppm
·Calcium Hardness: 200–400 ppm

How To Use chlorine tablets for above ground pool

Use stabilized chlorine tablets in an automatic feeder or floating chlorinator to ensure your pool receives a consistent supply of chlorine, and test the water regularly to verify the Free Available Chlorine (FAC) level is within 2.0–4.0 ppm. an inline feeder and for an average-sized in-ground pool you would add about chlorine tablets for above ground pool per week (each tablet treats 5,000 gallons of water).

First, Always be sure to read the tab’s ingredients and understand what you are putting in your pool besides chlorine. Another consideration is that if you leave chlorine tablets for above ground pool in your skimmer basket while the pump is off, then the water in the skimmer can become acidic. Then, when your pump starts again, it will get a dose of acidic water which can cause additional wear and tear on your equipment. 

Storage: Store your 3-inch chlorine tablets in a cool dry place away from direct sunlight or moisture to prevent them from breaking down prematurely.

Safety Precautions: When handling chemicals like chlorine tabs always wear gloves; avoid mixing different types of chemicals as this may cause dangerous reactions leading to toxic fumes or explosions.

Testing Parameters Regularly: It is important to test pH levels and free available chlorine (FAC) content regularly; This will help maintain optimal swimming conditions while preventing any harmful effects caused by over-chlorination.

To learn How to keep the swimming pool water clear, read this article: How to keep the swimming pool water cleary pools need 3 chlorine tablets for pool and the Benefits of using chlorine tablets

chlorine tablets for above ground pool

Precautions For 3-inch Chlorine Tablets

Chlorine tablets lower pH and Total Alkalinity and increase cyanuric acid levels. If used in moderation they should be more of your helping hand and below are some tips on how to use them properly.

One mistake a lot of people make when it comes to chlorine tablets is adding way too many. Your chlorinator or floater should never be filled to the top with tablets. This would be considered overuse of tablets which plummets your pH, causing your water to become acidic. This can cause burning eyes, and itchy skin, and ruin your pool equipment.

Maintaining safe pool water is essential for the health and well-being of those who swim in it. in operation please Wear eye protection, face protection, and protective gloves Do not get in the eyes, on the skin, or on clothing.

By following these easy guidelines, you can effectively utilize 3-inch chlorine tablets for optimal sanitation while ensuring safe & healthy swimming conditions!

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.