Are you aware that, with rain, hotter temperatures, and increased sunlight exposure, you may need to use significantly more chlorine in your pool than in the Spring and Autumn seasons? Heat, sunlight, runoff, and increased pool use all factor in significantly when it comes to sustaining appropriate chlorine levels.
If there’s a high bather load, or there’s just a lot of debris and other organic contaminants in the pool, more chlorine is required to properly sanitize the water.
In other words, fighting those materials in the water also demands more 3-inch stable chlorine tablets. So this situation is known as chlorine demand. It’s rare, but not unheard of.
How To Take Care of a Pool
Circulation
Pool water needs to move in order to disperse pool chemicals and improve water filtration. Stagnant water can create a breeding ground for bacteria and algae growth. Pool pumps circulate water. Run your pool pump at least 8-12 hours per day during daytime hours to properly circulate your swimming pool water.
Filtration
Pool water must be filtered to help maintain a clean and clear swimming pool. There are three main types of pool filters—sand, cartridge, and D.E. (diatomaceous earth).
Clean
Dirt and debris from swimmers and the surrounding environment collect in your swimming pool over time. Empty skimmer baskets and vacuum and brush your pool surfaces weekly. Pay close attention to areas around ladders, pool corners, pool lights, and other areas with little to no water flow. Skim the water’s surface as needed.
Test
Testing your swimming pool water is the first toward a balanced pool. Water chemistry can change quickly. Test weekly, or more frequently during peak swimming times, to ensure your pool remains clean and balanced for swimmers.
Maintain
Balance water parameters to their ideal ranges using the proper pool chemical products.
To learn How To Clean Better？Your Tub Needs Spa Chlorine Tablets, read this article: What are the classifications of pool disinfection 3 inch chlorine tablets 10 lbs and how do use them
How Adding 3-inch Chlorine Tablets To Your Pool Can Help You
Can adding 3-inch chlorine tablets to your pool make your life a little easier? Yes, it can!! Remember, most 3-inch Stable Chlorine Tablets are stabilized, which means they contain CYA/stabilizer. This can cause your CYA to start creeping up. You always want your CYA to be in the right range of 30 – 50 ppm. 3-inch Stable Chlorine Tablets are by far the easiest and most effective way to maintain your chlorine level of 2 – 4 ppm. You’ll always be assured your pool is properly sanitized and ready to swim in.
Another advantage of a chlorine pool is that chlorine kills bacteria. That’s good to hear anytime, but especially during a pandemic. If properly maintained, your pool will always be clear and clean. You want your levels to be high enough to disinfect, but not so high that they fade swimsuits and pool toys.
How to keep your pool from losing chlorine
Normally, you shouldn’t have to add chlorine more than once or twice a week to maintain proper chlorine levels of around 3 ppm.
But, if you find yourself adding chlorine several times a week just to keep up, then you’re dealing with excessive chlorine loss. Especially if your pool’s chlorine levels are dropping fast.
Chlorine loss happens for a variety of reasons. Reasons include everything from what’s in your pool to the temperature outside.
To prevent contaminant-related pool chlorine loss:
Skim the water to remove any floating debris
Brush the pool walls, stairs, and behind the ladders to remove buildup
Vacuum the pool floor for a clean finish
Use your pool water test kit to test your chlorine levels
Leave your pump running, and wait 4-8 hours
Test the water again and adjust the chlorine level as needed
Do all of this at least twice a week to keep your pool clean
A healthy pool has adequate chlorine to keep harmful microbes at bay without harming swimmers. Just make sure you’re mindful of your pool’s chemical levels, so they stay balanced.