Cheapest 3-inch Chlorine Tablets, Your Swimming Pool Is Save!

Where can find the cheapest chlorine? Chlorine prices continue to be insanely high for the 2023 pool season. But Poolwell has the best prices, the best places to get your Cheapest 3-inch Chlorine Tablets.

The cheapest 3-inch chlorine tablets are great as they dissolve slowly over time, are premeasured (no scooping), and can be added to a floating chlorine dispenser for ease of application.

Honestly, Turning your backyard into a heavenly oasis will significantly increase the value of your home. Plus, the memories that you’ll make with family and friends will be priceless.

Is Cloudy Pool Water Safe?

We know that cloudy pool water is not the most luxurious thing, but is it really that bad? If you’re not too picky, wouldn’t it be just fine to swim in a pool that isn’t perfectly clear? Unfortunately, regardless of how picky you are, it’s never a good idea to swim in water that isn’t clear. In fact, according to the Centers for Disease Control and Prevention (CDC), you should check each time you use your pool to make sure the drain at the deepest part of your pool is visible.

Cloudy pool water often means that there isn’t enough free chlorine in the water or the free chlorine is being diverted. It is busy dealing with particulate matter instead of bacteria and other disease-causing microorganisms. A cloudy pool may harbor germs such as Crypto (short for Cryptosporidium), Giardia, Shigella, norovirus, and E. coli.

So if a pool is cloudy, it is much more than a cosmetic issue. A cloudy pool needs to be cleaned before it is safe to swim in.

To learn Pool Water Purification Solutions – Optimal Use of 3 inch chlorine tablets 25 pounds, read this article: Pool Water Purification Solutions – Optimal Use of 3 inch chlorine tablets 25 pounds

Cheapest 3-inch Chlorine Tablets

How Cheapest 3-inch Chlorine Tablets Can Save Your Pool?

Chlorine needs to be dispersed through the water to clean it properly. As the tablets dissolve in the water, the chlorine attacks and breaks down contaminants such as bacteria. 

It does this by breaking down into hypochlorous acid and hypochlorite ions. These kill germs by oxidizing them and breaking down the chemical bonds that make up their structure. Hypochlorous acid does this on contact with the molecules. Hypochlorite ions have the same effect over a longer period.

There are a few different ways to add chlorine tablets to the pool that allow for a delayed release that will keep the water clean over time.

Floating chlorine dispenser

Most frequently used in hot tubs and smaller pools, these little floating islands slowly bob around your pool, steadily dissolving the tablets inside them. They are inexpensive and really easy to use, but softer pool walls like vinyl are not always the best choice.

Pool skimmer basket

A more automatic solution that will also more thoroughly distribute the water-cleaning chemical is to drop the tablets into your pool skimmer bucket.

Automatic chlorinator

A more heavy-duty approach for maximum convenience (along with a higher price tag compared to plastic and floating dispenser) is using an automatic pool chlorinator. it will disperse the right amount of chlorine. 

The Best Way To Store Cheapest 3-inch Chlorine Tablets

When stored correctly, chlorine tablets usually have a shelf life of about 3-5 years. Although they will still degrade, there is no cause for concern.

Store them out of the reach of children and at an appropriate temperature (50-70 degrees Fahrenheit or 10-21 degrees Celsius) or thereabouts.

Heat can cause chlorine tablets to degrade, so consider storing them on a well-ventilated shelf in your basement and remember to keep them out of direct sunlight at all times.

Swimming Pool Water Balancing

Pool Water balancing is not such a complicated exercise, It is simply the relationship between different chemical measurements in your pool water.

A pool that is “balanced” has proper levels of pH, Total Alkalinity, and Calcium Hardness. These are pH: 7.2-7.8, Total Alkalinity: 80-120 ppm, Calcium Hardness, 180-220 ppm, and Cyanuric Acid (Stabilizer): 30-50 ppm. Chlorine levels should remain constant in the 1-3 ppm range.


Lowering Alkalinity in Pools

Turn off the pump and allow water to become still, Add a pH Decreaser in one corner of the deep end to lower pH to 7.0-7.2, Raise pH to 7.2-7.4, and re-test Total Alkalinity, Repeat if Alkalinity remains too high.

Raising Alkalinity in Pools

Turn on the pump to circulate water, Sprinkle Alkalinity Increaser along the pool, edge to distribute the test pH and Alkalinity again after several hours. How much alkalinity increaser to add to your pool depends on your pool size and current tested level of total alkalinity.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.